ABY engine and AAN wiring loom???

[Spions]

Does any one know can I put AAN wiring loom on ABY engine?

[DJones]

Yes, though you may need to shorten/lengthen some of the wires..

[moggies]

Hi guys,While your on the subject of wiring for an AAN, what wires/colours fit the oil pressure/temp switch and which is the cooling temp wires/colours? On my S6, the temp and oil temp gauges don't work and no wires fitted to the oil switch? There are no spare wires nearby.
Thanks, if you can help.

[puglife]

I did a small writeup on the AAN loom into a cq but it has some amendments needed....

Oil temp sensor wire to Aux Gauge is Black/White (pin 2)and the plug for gauges is this one:


Oil Pressure switch has two wires (has two outputs) For the gauge its this plug.
Blue/Black (Pin 5)
White/Grey (Pin 6)


Coolant Temp Sensor (G62) Green/Black wire that goes to ECU pin 45. This also goes to Altitude sensor F96. Its a white two pin plug on back of cylinder head.



If you need any more pics i still have full loom laid out in spare room so can photograph connectors etc. Hope this helps.

[moggies]

Wow thats great. I will have a good look at the weekend when its light. Thanks